716M-LCF114-E01
7-16 DIN Male Connector for 1-1/4" Coaxial Cable, OMNI FIT™ Premium, Straight, O-Ring and compression sealing
Rev : A | Rev date : 07 Dec 2020
OMNI FIT™ high performance connectors are designed for use with both CELLFLEX® (copper) and CELLFLEX® Lite (aluminium) cables. They are designed specifically to provide the highest quality connector-cable interface while simplifying and speeding up connector attachment. All RFS Technologies connectors are fully tested for mechanical and electrical compliance to industry specifications.
The 4.3-10 connector is an innovative, space-saving RF connection meeting all requirements even under the most severe environmental conditions and not relying on coupling nut torque. Sealing against outer conductor and jacket by means of the o-ring and 360° compression fit. Multifunctional, self-lubricating HighTech polymer assembly locks on cable corrugation, avoids electrochemical potential differences and compression-fits to the jacket.
FEATURES / BENEFITS
- Ultra high PIM performance i.e. reduced interference leading to high customer satisfaction
- Two-piece design i.e. visual inspection of interlocking leads to improved installation security
- OMNI FIT™ concept i.e. streamlined order management and reduced stock level
- Watertight sealing in mated and unmated condition, i.e. reduced efforts during installation and improved security during operation
- Tri metal alloy plating i.e. extreme resistance against corrosion even under hardest climatic and environmental circumstances
- Multi-thread (Tristart) design i.e. simplified and accelerated tightening process
- RoHS (EU) and CRoHS (China) compliant i.e. can be used on a global basis
General Specifications |
|---|
| Transmission Line Type | | Coaxial Cable | | Cable Size | | 1-1/4 | | Cable Type | | Foam Dielectric | | Model Series | | UCF114-50 Series, LCFS114-50 Series, RCF114-50 Series | | Connector Interface | | 7-16 DIN | | Connector Type | | OMNI FIT™ PREMIUM Straight | | Sealing Method | | O-Ring + 360° Clamping | | Gender | | Male |
|
Electrical Specifications |
|---|
| Nominal Impedance, ohms | Ohm | 50 | | 3rd Order IM Product @ 2x20 Watts | dBc | -163 ; typical -167 | | Maximum Frequency | GHz | 3.6 | | VSWR, Return Loss | VSWR (dB) | 0 < f ≤ 1.0 GHz: 1.02 (40)
1.0 < f ≤ 2.2 GHz: 1.04 (34)
2.2 < f ≤ 2.7 GHz: 1.06 (31)
2.7 < f ≤ 3.7 GHz: 1.08 (28) |
|
Mechanical Specifications |
|---|
| Plating Outer/Inner | | NiTin/Silver | | Length | mm (in) | 81.9 (3.189) | | Outer Diameter | mm (in) | 50.95 (1.969) | | Inner Contact Attachment | | Spring Finger | | Outer Contact Attachment | | 360° clamping |
|
Accessories |
|---|
| Wrench size front | mm (in) | 48 | | Wrench size rear | mm (in) | 48 | | Poly Hook Spanner | mm (in) | PHS 60-90-5 Ø 60-90 (2.3-3.5) Pin 5 (0.2) | | Trimming Tool | | TRIM-SET-L114-D01
TRIM-LCF114-D01-A |
|
Testing and Environmental |
|---|
| Waterproof Level | | IP68 |
|
