CLAMP-158
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Distributor |
Stock |
|
RF Specialties of PA |
3 |
Buy
|
Rev : E | Rev date : 26 Feb 2015
Hanger, non-insulated, bolt-on for coaxial cable LCF158 and HCA158 and as fire resistance support for RCF158 and all RADIAFLEX® 1 5/8" with copper foil as outer conductor.
Made of stainless steel, kit of 10
FEATURES / BENEFITS
- Stainless steel hangers for supporting coaxial cable to tower.
- Member mounting holes with up to M10 or 3/8""-16 hardware.
- Hanger may be attached to angle adapters, tower standoffs.
- Hanger may be attached to round member adapters through slot.
- Installation every 10m (30ft) as fire resistance support for RADIAFLEX®. Keep's the RADIAFLEX® cable in position during fire impact to prevent potential blocking of escape path. All installation components should be made of stainless steel.
General Specifications |
---|
Product Line | | Coaxial Cable Accessories | Product Type | | Hanger | Hanger Type | | Bolt-On, non-insulated | Transmission Line Type | | LCF158, HCA158, RCF158 RLF*, RLK*, RAY*, RLV* | Cable Type | | Coaxial Foam Dielectric Air Dielectric |
|
Mechanical Specifications |
---|
Cable Size | | 1-5/8 | Number of Cable / Waveguide Runs | | 1 | Material | | Stainless Steel | Recommended / Maximum Clamp Spacing | m (ft) | 0.8 / 1.2 (2.75 / 4) |
|
Temperature Specifications |
---|
Operation Temperature | °C (°F) | -50 to 85 (-58 to 185 ) | Storage Temperature | °C (°F) | -50 to 85 (-58 to 185 ) |
|
Packaging Information |
---|
Package Quantity | | 10 |
|
Notes
If using the Bolt-on hanger series in vertical runs, the hoisting grips need to be kept on the tower.
* Valid for all 1 5/8" types