- Home
- /
- GKFORM60-300
GKFORM60-300
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for Air Dielectric Cable® 3" Cable
Distributor | Stock | |
---|---|---|
RF Specialties of PA | 28 | Buy |
The pre-formed copper strap facilitates a proper attachment to the coaxial cable, ensuring that the performance of the coax is not being compromised. This kit has been verified by independent labs to withstand the damaging effects of lightning current in excess of 100kA 10/350µs. The 6-AWG, 13.2mm2, 7 strand copper wire provides the most practical and effective low inductance transfer of lightning induced current from your coax to your system ground. Also included is the required mastic and electrical tape for weatherproofing. Installation of ground kits is recommended as a minimum at the top and bottom of each vertical run, at regular intervalls in long vertical runs and just prior to building entry. As international and national regulations apply for potential equalization please make sure to comply with them.
FEATURES / BENEFITS
-
Compatible with both copper and aluminium cable types. One Grounding Kit for both outer conductor materials eliminates the risk of faulty Grounding Kit installation and helps to keep inventory down.
-
This kit has been verified by independent labs to withstand the damaging effects of lightning current in excess of 50kA 10/350µs according to EN 50164.
-
The copper wire provides the most practical and effective low inductance transfer of lightning induced current to ground.
-
No influence on the electrical transmission characteristics of the coaxial cable.
-
Compliant to RoHS (EU 2002/95/EC) and CRoHS (China SJ/T11363-2006) i.e. usable on a global basis.
External Document Links
Notes
Technical features
|
|
|
Related Products
HCH-300-1L4
Cable hanger for Air Dielectric Cable
- Hanger Type : Angle iron 40mm (1.575")
- Cable Type : Air Dielectric
- Cable Size : 3
Clamps
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Wall Feedthrough Sealing
Wall feed through (without feed through plate) for HCA300 cable
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for Air Dielectric Cable® 3" Cable
Tools
Hoisting Grip for HCA300 and HCA400 Coaxial Cable, Lace-Up
Coaxial Transmission Line
3" Air Dielectric Cable
3" Air Dielectric Cable, flame retardant/ halogen free jacket
HCH-300-1C
Cable hanger for Air Dielectric Cable
- Hanger Type : Anchor bar 18-22mm (0.71-0.87")
- Cable Type : Air Dielectric
- Cable Size : 3
Clamps
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Wall Feedthrough Sealing
Wall feed through (without feed through plate) for HCA300 cable
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for Air Dielectric Cable® 3" Cable
Tools
Hoisting Grip for HCA300 and HCA400 Coaxial Cable, Lace-Up
Coaxial Transmission Line
3" Air Dielectric Cable
3" Air Dielectric Cable, flame retardant/ halogen free jacket
HCH-300-1R
Cable hanger for Air Dielectric Cable
- Hanger Type : Flat iron 6-12mm (0.24-0.47")
- Cable Type : Air Dielectric
- Cable Size : 3
Clamps
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Wall Feedthrough Sealing
Wall feed through (without feed through plate) for HCA300 cable
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for Air Dielectric Cable® 3" Cable
Tools
Hoisting Grip for HCA300 and HCA400 Coaxial Cable, Lace-Up
Coaxial Transmission Line
3" Air Dielectric Cable
3" Air Dielectric Cable, flame retardant/ halogen free jacket
CLAMP-300
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
- Hanger Type : Bolt-On, non-insulated
- Cable Type : Air Dielectric
- Cable Size : 3
Clamps
Cable hanger, non-insulated, bolt-on, for E60 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for E78 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1 1/4" coaxial cable and eliptical waveguide E65 and E70
Cable hanger, non-insulated, bolt-on, for E130 and E150 elliptical waveguide
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger, non-insulated, bolt-on, for 2 1/4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 1 5/8" coaxial cable
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E105
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E78
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E65
Universal clamp with clamp lining for FLEXWELL® Elliptical Waveguide E60
Cable hanger with clamp lining for twistflex R70
Cable hanger with clamp lining for twistflex R140
Cable hanger with clamp lining for twistflex R120
Cable hanger with clamp lining for twistflex R100
Cable hanger with clamp lining for twistflex R84
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Cable hanger, non-insulated, bolt-on, for 7/8" coaxial cable and E100, E105 elliptical waveguide
Cable hanger, non-insulated, bolt-on, for 1/2" coaxial cable and elliptical waveguide
Installation Hardware
Angle Member Adapter Kit 3/8" (SS) (Kit of 10)
Ceiling adapter, 305mm (12") (kit of 5), 3/8"
Ceiling adapter, 610mm (24") (kit of 5), 3/8"
Wall Feedthrough Sealing
Wall feed through (without feed through plate) for HCA300 cable
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for Air Dielectric Cable® 3" Cable
Tools
Hoisting Grip for HCA300 and HCA400 Coaxial Cable, Lace-Up
Coaxial Transmission Line
3" Air Dielectric Cable
3" Air Dielectric Cable, flame retardant/ halogen free jacket
WF-300
Wall feed through (without feed through plate) for HCA300 cable
- Product Line : Coaxial Cable Accessories
- Transmission Line Type : HCA300
- Cable Size : 3"
Clamps
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for Air Dielectric Cable® 3" Cable
Tools
Hoisting Grip for HCA300 and HCA400 Coaxial Cable, Lace-Up
Coaxial Transmission Line
3" Air Dielectric Cable
3" Air Dielectric Cable, flame retardant/ halogen free jacket
HOIST1-300L
Hoisting Grip for HCA300 and HCA400 Coaxial Cable, Lace-Up
- Product Line : Coaxial Cable Accessories
- Product Type : Hoisting Grip
Tools Leaflet
Clamps
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Cable hanger, non-insulated, bolt-on, for 4" coaxial cable
Cable hanger, non-insulated, bolt-on, for 5" coaxial cable
Tools
Flanging die for HCA 4" Size E
Hoisting Grip for Coaxial Cable and Elliptical Waveguide, Lace-Up
Coaxial Transmission Line
4" Air Dielectric Cable, flame retardant/ halogen free jacket
4" Air Dielectric Cable
3" Air Dielectric Cable
3" Air Dielectric Cable, flame retardant/ halogen free jacket
Wall Feedthrough Sealing
Wall feed through (without feed through plate)
Wall feed through (without feed through plate) for HCA300 cable
Grounding Kit
Grounding Kit, Pre-formed Copper Strap
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for Air Dielectric Cable® 3" Cable
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for Air Dielectric Cable® 4" Cable
Connectors
1-5/8" EIA Connector for 1-5/8" Coaxial Cable, Gas stop/ Gas pass,O-Ring Sealing
3-1/8" EIA Connector for 3" Coaxial Cable, Gas stop/ Gas pass,O-Ring Sealing
3-1/8" EIA Connector for 4" Coaxial Cable, Gas stop/ Gas pass,O-Ring Sealing
HCA300-50J
3" Air Dielectric Cable
- Applications : TV & Radio, HF Defense, Cable Solutions
- Jacket Option : Black
- Fire Performance : Halogene Free
Clamps
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Wall Feedthrough Sealing
Wall feed through (without feed through plate) for HCA300 cable
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for Air Dielectric Cable® 3" Cable
Tools
Hoisting Grip for HCA300 and HCA400 Coaxial Cable, Lace-Up
Coaxial Transmission Line
3" Air Dielectric Cable, flame retardant/ halogen free jacket
HCA300-50JFN
3" Air Dielectric Cable, flame retardant/ halogen free jacket
- Applications : TV & Radio, HF Defense, Cable Solutions
- Jacket Option : Black
- Fire Performance : Flame Retardant, LS0H
Clamps
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger for Air Dielectric Cable
Cable hanger, non-insulated, bolt-on, for 3" coaxial cable
Wall Feedthrough Sealing
Wall feed through (without feed through plate) for HCA300 cable
Grounding Kit
Grounding Kit, Pre-formed Copper Strap, 1.5m (60") for Air Dielectric Cable® 3" Cable
Tools
Hoisting Grip for HCA300 and HCA400 Coaxial Cable, Lace-Up
Coaxial Transmission Line
3" Air Dielectric Cable